Copper
Cathode plates, high-purity powder, busbars and strip. Powder is quoted as PMU 5N (99.999%) or PMU 6N (99.9999%), melt-dispersion and argon sealed.
Independent test reports from GBTC for copper powder and tungsten powder. Batch-wise reports are available on request for each shipment.
Copper and tungsten raw materials from several reputable mineral suppliers worldwide.
Smelting, powder making, inspection and final packaging at our plant.
Independent test reports from GBTC, a third-party laboratory.
Certificate of Origin and a sanctions compliance declaration for EU compliance requirements.
Reference illustrations of our processing steps. These are not photographs taken inside the plant.
01 CastingLadle pour into the casting pit
02 SmeltingConverter mouth, molten copper stream
03 RefiningElectrolytic tank house, cathode plates
04 PowderCopper powder into the hopper
05 WarehouseCopper rod and billet storage
Inside the plant
Factory processing and product photographs.
Packing
Furnace hall
Powder making
Pressing
Copper bar
Strip and coil
Labelled ingots
Plate crates
Powder sample
Powder close-up
Product lines
We supply metal and non-metal raw materials from international suppliers, processed at our plant and shipped worldwide. Transport, independent test reports and customs clearance are handled for you.
Send the grade, particle size or bar dimension and the destination port. We come back with availability, documentation and a price.
Cathode plates, high-purity powder, busbars and strip. Powder is quoted as PMU 5N (99.999%) or PMU 6N (99.9999%), melt-dispersion and argon sealed.
Tungsten powder from W0.8 to W20, tungsten bars, rods and plates. W3 is the grade we hold test reports for; heavier grades are quoted to order.
Nickel cathodes 4×4, cut cathodes, briquettes and powder for stainless steel, superalloys, plating and battery precursors, quoted by grade.
Zinc ingots, plates and bars, plus zinc and zinc-aluminium powders from 0.5 µm for galvanising, die casting and anti-corrosion coatings.
Beyond copper, tungsten, nickel and zinc we source other metals and non-metallic products such as coal, fertiliser and other bulk non-metallics. Send the specification and the volume, and we confirm availability case by case.
Grade reference
Copper powder is made by melt dispersion and sealed under argon. Alloy and zinc powders are atomised and classified to the fraction you need. Purity, particle size and packing are fixed per order, and every lot carries a certificate.

PMU 5N
Electronics, conductive pastes, 3D printing, semiconductors.

PMU 6N
Semiconductors, laboratory and R&D work, high-end pastes.
Tungsten W3
Cemented carbides, wear parts, electrodes, 3D printing, aerospace, high-temperature parts.

Zinc
Galvanising, anti-corrosion coatings, batteries, thermal spraying, powder metallurgy, additive manufacturing.

Nickel
Stainless steel, superalloys, plating, battery precursor, powder metallurgy. Each lot ships with a COA.

Bronze

Brass

Aluminium
| Grade | Fischer grain size (µm) | Oxygen, max (%) | Apparent density (g/cm³) | Shelf life |
|---|---|---|---|---|
| W0.8 | 0.7–1.0 | 0.25 | 1.6–2.4 | 3 months |
| W1 | 0.9–1.2 | 0.20 | 1.7–2.5 | 3 months |
| W1.3 | 1.2–1.5 | 0.15 | 1.9–2.7 | 3 months |
| W1.5 | 1.4–1.8 | 0.15 | 1.9–2.8 | 3 months |
| W1.7 | 1.6–2.0 | 0.15 | 2.1–3.2 | 3 months |
| W2 | 1.8–2.3 | 0.12 | 2.0–4.0 | 6 months |
| W2.5 | 2.3–3.0 | 0.12 | 2.2–4.2 | 6 months |
| W3 | 2.7–3.5 | 0.12 | 2.5–4.0 | 6 months |
| W4 | 3.5–4.5 | 0.10 | 3.1–4.4 | 12 months |
| W5 | 4.5–5.5 | 0.10 | 3.0–4.5 | 12 months |
| W6 | 5.5–6.5 | 0.10 | 3.0–4.7 | 12 months |
| W14 | 11.5–15.5 | 0.08 | 4.0–6.0 | 12 months |
| W20 | 18–25 | 0.08 | 5.7–6.9 | 12 months |
Tungsten content across these grades is 99.95–99.98%. Apparent density is determined optionally and a deviation from the stated range is not a nonconformity. Shelf life runs from the date of manufacture. Each batch ships with its quality certificate.
These are the standard units. We pack to your requirement — inner liner, argon fill, lot label and pallet configuration can be changed per order.
Other copper fractions up to 0–64 µm, tungsten grades from W0.8 to W20, zinc powders down to 0.5 µm and nickel powders from 0.5 µm are available on request. The raw material comes from our high-purity metals partner; melting, atomising, packing and inspection are handled order by order.
About us
Raw material comes from international suppliers of copper, tungsten, nickel and zinc.
The full process — smelting, powder making, inspection and final packaging — runs at our plant, and every lot leaves with its test report.
For each shipment we can supply independent test reports from GBTC, a Certificate of Origin and a sanctions compliance declaration to satisfy your EU compliance requirements.
Reception, Shenzhen office
Test reports
Full inspection and test reports for copper powder and tungsten powder W3 are available to download below. Batch-wise reports, Certificate of Origin and a sanctions compliance declaration are issued for each shipment on request.
GBTC · Inspection & Test Report
GBTC · Inspection & Test Report
Ask for the batch-wise report that matches the lot you receive. Every shipment can also carry the Certificate of Origin and the sanctions compliance declaration.
On request we can also supply test reports and certificates of conformity that meet the import requirements of your market.
Grade, quantity and destination port are enough to start. We come back with availability, documentation and a price.
Or reach the sales desk directly